From: ddoyle9570@aol.com
Date: Sun Jun 23 2002 - 06:08:14 PDT
The master cylinder on a M35 is a steel casting, with a steel screw off lid. It is mounted under a hinged door in the drivers side floor board. There is a metal vent line attached to a 90 st ell in the lid. Despite a hole being punched in for clearence, there is a hat channel on the bottom of the truck floorboard that is in the way of easy filling without a funnel.
Hope this helps,
David
This archive was generated by hypermail 2.1.4 : Fri Aug 16 2002 - 11:23:22 PDT