Re: [MV] CUCV gauges

From: Jim Cooney (triumphtrash13@eircom.net)
Date: Sat Jan 29 2005 - 11:00:22 PST


Hi Charles,

Just last week I fitted a "Sportpro" temperature gauge and oil pressure
gauge. They work a treat. I put them in the slot for the radio. They are
clear and easy to read and I feel much safer with them than relying on idiot
lights. The temp gauge is mechanical and reads even with the ignition off.
Get them, fit them! You won't regret it!

Jim.....in Ireland
M1008 A1 CUCV.

****************************************************************************
******************
----- Original Message -----
From: "Charles J. Miller" <nsaamiller@nvc.net>
To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
Sent: Saturday, January 29, 2005 4:50 PM
Subject: Re: [MV] CUCV gauges

-----Original Message-----
From: Charles J. Miller [mailto:nsaamiller@abe.midco.net]
Sent: Saturday, January 29, 2005 6:58 AM
To: 'mil-veh@mil-veh.org'
Subject: CUCV gauges

Listers-

Since the electrical issue was so straight-forward, THANKS to all who
responded; I have another question.

Has anyone out there tired of the idiot lights and put in a temp
guage/tachometer/oil press setup? Even just a temp guage would be dandy.

It would seem to be fairly straight-forward, but before I spend the dough on
something that is bound to fail, I thought I'd ask!

charles

===Mil-Veh is a member-supported mailing list===
To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
To reach a human, contact <ack@mil-veh.org>



This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:39:29 PDT