Re: [MV] 44 GPW clutch won't release

Steven P. Allen (spallen@rolemail.ccis.edu)
Fri, 13 Aug 1999 09:20:30 -0500

Is the clutch plate in backwards?

Steve Allen

At 11:34 PM 8/12/99 EDT, OhioJeepr@aol.com wrote:

>We have adjusted the clutch linkage all the way until the clutch fork hits
>the inside of the bell housing when the pedal is depressed. You still have
>to force the transmission into gear. I believe the problem is inside the
>bell housing.
>
>The transmission was checked out and is not the problem. I am told that the
>clutch fork is original and worked before the restoration. Throw-out bearing
>is new. Flywheel is resurfaced. Pressure plate checked out and adjusted.
>Has anybody had a similar problem? Is the clutch fork ball stud adjustable?

===
To unsubscribe from the mil-veh mailing list, send the single word
UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.